Multipara patient monitor

About Multipara patient monitor

• Technical specification

  ECG

  • Lead Mode: 5 Leads or 3 leads
  • Lead selection: I, II, III, avR, avL, avF, V,
  • Gain: ï2.5mm/mV, ï5.0mm/mV, ï10mm/mV, ï20mm/mV, auto

  HR and Alarm

  Range

  • Resolution: 1 bpm
  • Diagnostic: 0.05 100 Hz
  • Calibration Signal: 1 (mV p-p), Accuracy5%
  • ST Segment Monitoring Range: Measure and Alarm -2.0 +2.0 mV
  Respiration
  • Method: Impedance between R-F(RA-LL)
  • Bandwidth: 0.3 2.5 Hz
  • Resolution: 1 rpm
  • Accuracy: ï2 rpm
  • Apean Alarm: 10 40 S

  NIBP

  • Method: Oscillometric
  • Mode: Manual, Auto, STAT
  • Pulse Rate Range: 40 240 bpm
  • Alarm Type: SYS, DIA, MEAN
  • Resolution Pressure: 1mmHg
  • Accuracy Pressure Maximum Mean error: ï5mmHg
  • Maximum Standard deviation: ï8mmHg
  • Overpressure Protection

  SpO2

  • Measuring Range: 0 100 %
  • Alarm Range: 0 100 %
  • Resolution: 1 %
  • Accuracy
  • 0% 69% unspecified
  • Actualization interval: about 1 Sec.
  • Alarm Delay: 10 Sec.
  Pulse Rate
  • Measuring and Alarm Range: 20300bpm
  • Resolution: 1bpm
  • Accuracy: ï2bpm

  Temperature

  • Channel: 2
  • Measuring and Alarm Range: 0 50 C
  • Resolution: 0.1C
  • Accuracy: ï0.1C

  Tag:

  Patient Monitor, Multi Parameter Monitor, Multipara Monitor, Cardiac Monitor, Portable patient monitor, medical monitor and ICU Patient Monitor